FULL MOTION 2-ARM CORNER Wall Mount Bracket 42-74inch TVs to 132 lbs

Description

Adjustable Tilting up/down (+15 degrees forward, -15 degrees back) and Swivel left/right (+-45 degrees side to side) Wall Mount Bracket for LCD Plasma (Max 132Lbs, 42~74inch) - This is an angle adjustable wall bracket for LCD or Plasma TV's. This Flat Wall Mount supports most
any
42in to 74in flat panel screen and plasma TVs up to 132 lb weight that comply with VESA mounting standards. Motion MAY be limited depending on the corner configuration used. Please see PRODUCT MANUAL for special CORNING MOUNTING considerations
This mount is intended to be used in a CORNER MOUNT situation. A stud should be located on each corner wall location.
Will fit most small to mid-sized flat panel LED, LCD, and plasma TVs with mounting patterns up to VESA 826x404.
Mounting holes on television should be 32.5inch or less apart horizontally & 15.75inch or less apart vertically
Maximum weight capacity: 132lbs
Wall Back mount plate: 2 sections, each 9inchW x 8inchH
TV Front mount plate: 34inch x 6inch
Measurements are from edge to edge. Mounting points for bolts will be shorter.
Tilt: up to 15 degrees upward & 15 degrees down (variable)
Swivel: -45 to +45 degree rotation (left/right depending on TV size and location from wall.
This swivel will be greatly affected by the location of the corner mount plates.
Mount continues to allow for left/right swivel after mounting, with tension controllable via supplied hex tool
Extension from wall: Not applicable
Solid toughened steel construction
Durable scratch resistant
Black Finish
Easy installation
Mounting hardware (Screws to go into back of TV & Fittings for brick and stud walls)
Estimated ACTUAL Quantity Available:
34. Should you need more stock than our advertised quantity of 50pcs, please click the CONTACT SELLER link and let us know how many you need and we will update the TOTAL QUANTITY available.